This my 3-D printing design for an I phone 6 case. This is my walk through of how to make it and experience when I was doing it. First you make an box and change the radius to 1.95 to make it round. If you want to learn how to do that just type up Chamfer and fillet, these are the things we learnt to make it curved. Then you change the height to 159.10 and the width to 78.50. After that you make a copy of the box and turn the height and width to 1.00mm less than the original make it an hole. Put that inside the Box and lift it to 2.00 of the work plane(so it doesn’t cut the whole thing).
Now we are onto the holes. The first one you have to make is on the top and bottom and the sides for volume and power. Then make an hole for the logo and camera.
I had an good time making the 3-D printing and I hope you did to.
Kia Ora Isla,
ReplyDeleteWelcome to the summer learning journey for 2017. It’s fantastic to have you join us. My name is Cadence and I will be working with your cluster this summer.
Wow! I’m amazed you have been designing Phone cases! That’s very cool! I wish I got to do stuff like that when I was at school. What was the most challenging part of designing the phone case?
Here is a quick remind of how to access the Summer Learning Journey site, copy this link in to your URL bar.
https://sites.google.com/site/summerlearningjourney/weekly-activities
Read through the activity then head on over to your own personal blog. Don’t forget the bonus tasks to earn extra points. There are fantastic prizes are up for grabs! Remember, you don’t have to post in any particular order.
To check out your classmate’s blogs copy and paste this link below for the live feeds.
https://sites.google.com/a/manaiakalani.org/connected-learners-share/sljtwitterfeeds
If you have any questions, don’t hesitate to ask.
Looking forward to reading your blog posts!
Cadence :)