This my 3-D printing design for an I phone 6 case. This is my walk through of how to make it and experience when I was doing it. First you make an box and change the radius to 1.95 to make it round. If you want to learn how to do that just type up Chamfer and fillet, these are the things we learnt to make it curved. Then you change the height to 159.10 and the width to 78.50. After that you make a copy of the box and turn the height and width to 1.00mm less than the original make it an hole. Put that inside the Box and lift it to 2.00 of the work plane(so it doesn’t cut the whole thing).
Now we are onto the holes. The first one you have to make is on the top and bottom and the sides for volume and power. Then make an hole for the logo and camera.
I had an good time making the 3-D printing and I hope you did to.
